How to Fill and Use a Scattering Tube
How to Fill and Use a Scattering Tube
Detailed instructions for assembling and using ash scattering tubes.
![](/content/files/lib/scattering-tube-assembly-and-usage-instructions-step-1.jpg)
Step 1
Remove lid from urn by twisting gently.
![](/content/files/lib/scattering-tube-assembly-and-usage-instructions-step-2-3.jpg)
Step 2
Remove inner (white) tube by twisting gently and place on a flat surface with the open end facing upwards. Slowly fill the white tube with cremated remains (using a funnel if required).
![](/content/files/lib/scattering-tube-assembly-and-usage-instructions-step-3.jpg)
Step 3
Squeeze a generous line of glue approximately one inch below the rim around the inside circumference of the outer tube (the tube with the printed image and a hole in the base).
![](/content/files/lib/scattering-tube-assembly-and-usage-instructions-step-4.jpg)
Step 4
Line up the openings of both tubes and push the outer tube downwards slowly, to allow air to escape through the vent hole. Rotate as pushing.
![](/content/files/lib/scattering-tube-assembly-and-usage-instructions-step-5.jpg)
Step 5
Once the tubes are firmly in place, attach the label provided over the vent hole.
PLEASE NOTE – it is important to attach the label at this point in the assembly to prevent any leakage of cremains through the vent hole when the tube is returned to its upright position.
![](/content/files/lib/scattering-tube-assembly-and-usage-instructions-step-6.jpg)
Step 6
Turn the sealed urn over and replace the lid ensuring that the image is aligned.
![](/content/files/lib/scattering-tube-assembly-and-usage-instructions-step-7.jpg)
Step 7
To scatter cremated remains, remove the lid and push out the perforated disc.